Sacramento Trenchless Sewer Repair, Replacement & Pipe Lining

ryanydig@hotmail.com
(916) 488-1215

Affordable Trenchless & Pipe Lining

Milk Plant

We were hired to work with a contractor to locate and repair some leaking pipes in a milk plant. We found that after some cooling lines went bad, hot water caused two traps on the sink drain to leak. There was no way of cutting open the floor and CIPP lining was the best method for this project. After the cooling lines were repaired the liner was installed and the problem was solved.

Our Services

Affordable Trenchless & Pipe Lining is an independent, owner-operated business with over 20 years of experience in all aspects of residential, commercial, and municipal work.

Trenchless Sewer Line Repair and Replacement

This process only takes a few hours and it takes up to 1-2 days for the entire work to be done. The advantages of using this method is that there is minor digging damage to your landscape

Water Line Repair

trenchless sewer pipe repair allows experts to perform repairs underneath existing structures without having to damage or remove them.

Pipe Lining with Cure-In-Place

Cure-In-Place pipe lining is a sewer lateral rehabilitation method. The system was developed for relining small diameter pipes.

Video Camera Sewer Inspection

Video Inspection is the process of running cameras through sewer lines and performing detailed inspections to identify deficiencies in the sewer system.

Continuous Lining Rehabilitation

this method allows us to do longer and larger lines in one shot, plus use thicker liner. In addition, we can use a manifold that pushes steam through our liner speeding up our cure time process.

Direction Drilling & Boring

Directional boring, also referred to as horizontal directional drilling (HDD), is a minimal impact trenchless method of installing underground utilities such as pipe, conduit, or cables in a relatively shallow arc or radius

Reinstating

After a CIPP liner has been installed, lateral sewer connections must be open to restore services. A robotic cutter with a high speed router bit is used to make an initial rough opening cut.

Hydro Jetting & Root Removal

Hydro jetting and root removal are essential and recommended. The roots from trees grow very strong and are often the reason why pipes get damaged.